Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3
Subframe Mount
⇒ “3.1 Overview - Subframe Mount”, page 104
⇒ “3.2 Tunnel Crossmember, Removing and Installing”,
page 105
⇒ “3.3 Transmission Support with Transmission Mount, Remov‐
ing and Installing”, page 106
⇒ “3.4 Transmission Mount, Removing and Installing”,
3.1
Overview - Subframe Mount
1 - Nut
❑ 20 Nm
❑ Only remove if the trans‐
mission mount must be
separated from the
transmission support
2 - Bolt
❑ 70 Nm
3 - Bolt
❑ 40 Nm
4 - Transmission
5 - Nut
❑ 20 Nm
6 - Transmission Support
❑ Removing and instal‐
ling. Refer to
7 - Transmission Mount
❑ Removing and instal‐
ling. Refer to
8 - Lower Stop
❑ For the transmission
mount
9 - Bolt
❑ 20 Nm + 90°
❑ Always replace
❑ Only remove if the transmission mount must be separated from the transmission support
10 - Tunnel Crossmember
❑ Removing and installing. Refer to
⇒ “3.2 Tunnel Crossmember, Removing and Installing”, page 105
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
104
Rep. Gr.37 - Controls, Housing
