Page 10 of 12
© 2018 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Figure 12.
Read measured value menu “Start update”.
Figure 13.
Read measured value menu.
3. Check the measured values against your vehicles configuration:
91.1
– Key Number In Use:
Press a button on the remote control.
The value will update showing you which key number is being identified.
Using Figure 13 as an example, you can see the system has identified key number 1.
Note:
When possible, keys of this system should be readapted to their current position. Example: When adapting a
new key to the vehicle, because a key has been lost, check and note each existing keys number (this scenario
assumes that key 1 has been identified, and the customer lost key 2). When prompted to hold key 1 on the coil
you would hold the key with remote control key number 1 to the coil. When prompted to hold key 2 on the coil,
you would hold the new replacement key to the coil.
