28. Answer the questions at the end regarding the workshop order, vehicle chassis
number and success of work carried out.
29. Transmit your answers via the workshop network.
30. Switch off the ignition.
31. If satellite reception (in the workshop) is poor, update programming may result
in the navigation system losing its location details. For this reason, please check
that the navigation system (if available) is functioning correctly. To do this,
press the "NAV" function selector button to switch to the NAV menu.
32. Use the control button (see figure in Chapter 1;
button, bottom right, next to
the rotary pushbutton) to activate the map display. If a map display opens showing
the vehicle's correct position, the navigation system has been initialised and you can
leave out the next step.
33. If only an arrow is displayed on an empty map, the vehicle must be positioned in the
open with the MMI switched on for five to ten minutes.
MMI update programming is now complete. Remove the update CD from
the vehicle; you can use the CD to update the MMI in other vehicles.
Thank you very much!
