Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Spark plug socket and extension - 3122B-
♦ Puller - T10530-
♦ Torque wrench - VAS 6583- , measuring range 3 to 60 Nm
Table of tightening torques for installation:
Component/fastener
[Nm]
Spark plugs
30
Bolt securing ignition coil
9
Securing bolts for connector rail
5
Removal steps:
– Remove engine cover panel
.
– Applies to vehicles from model year 2014 onwards: Remove
nuts -arrows- for earth wires and place them to one side. Make
sure that wiring is not kinked or damaged.
Step 1 - removing spark plugs, cylinder bank (right-side):
Audi A8 2010 ➤
Maintenance - Edition 11.2014
90
3. Maintenance
