Audi A7 2013, Getting To Know Manual

Page: 15 / 25

To activate, pull the control stalk toward you.
At your desired speed, press the “SET” button
at the end of the stalk. The set speed and a
cruise symbol are shown in the Driver
Information Display.
Set Cruising Speed
Activate
Cruise Control
Important Warnings and Safety Information, which you must read, are listed on the last panel under cruise control.
Changing Speed
To cancel and resume cruise control:
1. Press the brake pedal or push the stalk
slightly away from you.
2. The CRUISE light will go off.
3. To resume, pull the stalk towards you;
you will return to your set speed.
Your most recently set speed appears as a
small icon in the Driver Information Display.
It remains in memory until you turn your
Audi off.
Cancel/Resume
There are three ways to change your
speed:
1. Accelerate or decelerate, then press
“SET” again.
2. To increase/decrease speed in 1 mph
increments, or 2.5 mph increments
with adaptive cruise control, tap the
stalk up or down.
3. Hold the stalk up or down to
increase/decrease speed in 5 mph
increments; release when desired
speed is reached.
Note: Refer to your Owner’s Manual for additional information about Adaptive Cruise Control.
Cruise Control