Audi A5 Sportback (8T) 2010
No. 122, Body, Edition 8.09
4 Installing/removing roof bars on vehicle
6
14
–
Turn bolt -13- approx. 10 times to screw in.
–
Close the cover flap -16- and lock the lock with the key.
4.4
General notes
Technical data
Weight of roof bar set: approx. 6 kg
Roof load/load
Maintenance instructions:
The roof bars should always be cleaned and kept in good
order. It is particularly important to remove any dirt and salt
in the winter.
4.5
Setting the roof bar width
Instructions for the qualified workshop if the position of the
support bracket for the relevant vehicle is not set correctly.
–
Install the roof bars on the vehicle
⇒
page 9
.
–
Use an Allen key (5 mm) to unscrew the hexagon bolts -2-
on the right-hand support bracket far enough that the sup-
port bracket can still be moved. The roof bar remains on
the vehicle roof during this process.
To determine the roof load:
Weight of the roof bars
+ The weight of body part
+ The weight of the load
= Roof load
WARNING!
Never exceed
♦
the maximum permissible roof load (75 kg 165 lbs.)
♦
the gross axle weight rating
♦
the gross vehicle weight rating
of your vehicle
⇒
Vehicle operating instructions.
ZUB-0342
2
