AUDAC VIRO5, User Manual

Page: 8 / 12

VIRO5 - User manual 08
Chapter 2
Overview VIRO: Back
1) Cable entry plate
To connect the VIRO, the cable must pass through the
backplate. The VIRO has two standard cable grommets in
the provided openings. This grommet provides water tight
protection.
An optional speakON connection plate with two NL4MP
connectors (CVS102) is available. It can be installed by
loosening the four screws of the cable entry plate. To
connect, the back plate must be released.
3) Bracket
The bracket of the VIRO is attached to the centre point of
the speaker. It is designed in such a way that it can be fully
rotated around the centre point. This allows the bracket to
be mounted in all directions . More information about the
bracket in ‘Chapter 3’.
2) Drop safety bushing
The VIRO5 has a M6 safety bushing. This provides the
option of mounting drop safety wires. Please check your
local regulations if this is required.
4) Water drainage holes
Two drainage holes are located at the bottom of the VIRO.
The loudspeaker has a protection class of IP55 thanks to the
sealing rubbers, the water-repellent cloth behind the grill and
the drainage holes.
Install VIRO at a minimum down tilt of 5°. Standing water is
avoided trough this installation. At the same time, make sure
that the drainage holes are located at the bottom.
1
2
4
3