21
21
21
21
CHANGE PRIORITY SETTINGS
Here you can enable or disable both priority channels. You can also choose on which Zone output
you want to route the priority channels.
Remember: if you enable both priority channels and you route them to the same zone output,
priority channel 1 will have the highest priority in case both priority channels are switched on.
Do not forget to press the “Change Settings” button when you are done.
RESTORE FACTORY SETTINGS
BE CAREFULL
to press this button. It really will recall the
ORIGINAL
factory settings !!!
It
does not
recall previously saved settings. In stead, it recalls the original factory settings !!
If you want to recall previously saved settings, you need to press the “Recall Settings” button in the
“Control Screen” or press simultaneously the buttons ‘Zone 5’ and ‘Zone 6’ on the front panel of
the R1. Hold down the 2 buttons for about 10 seconds.
