20
20
20
20
CHANGE NETWORK SETTINGS
In this window the IP-address can be changed manually or can be set to DHCP. Do not forget to
press the “Change Settings” button after the changes are made !! Standard the IP-address will be
192.168.0.181. (The subnetmask is set fixed to 255.255.255.0)
Be aware:
When set to DHCP, the DHCP-server of the network will automatically give a free IP-
address to the R1. You will have to find out this IP-address yourself to be able to surf to
the R1’s website !!!! The next time you start-up the R1, the IP-address given by the
DHCP-server can be different !!!!
If you don’t know the given IP-address, the R1 will be lost in the network !!!
It is possible to restore the factory settings and thus also the factory network address by
pressing together the routing buttons of Zone 1 and Zone 2 and holding them down for 20
seconds.
To use the automatic time adjustment, you need to fill in an ip-address for the R1, the default
gateway of your network, an ip-address of a timeserver and the time zone. Check the NTP option
and do not forget to press the “Change settings” button. Time zones marked with a ”
*
” uses
daylight saving time.
Timeservers can be found on:
http://www.eecis.udel.edu/~mills/ntp/clock1a.html
http://ntp.isc.org/bin/view/Servers/StratumOneTimeServers
