17
Applications
Setup procedure
1.
Before connecting the microphones and instruments, be sure that all devices are turned off. Also be
sure that all of the mixer’s channel faders and master control faders are set all the way down.
2.
For each connection, connect one end of the cable to the relevant microphone or instrument, and
connect the other end to the appropriate input jack on the mixer.
NOTE:
Where an input channel contains both a ‘Mic Input’ and a ‘Line Input’ jack, you may use either one of these
jack’s but don’t use both at the same time.
3.
To avoid damage to the speakers, power-up the devices in the following order:
Peripheral devices
Mixer
Power amps (or powered speakers).
NOTE:
When shutting the system down, turn off the power in the opposite order:
Power amps (or powered speakers)
Mixer
Peripheral devices.
Chapter
4
Summary of Contents for PMX124
