6
Pin connections on Connectors
XLR (input, output)
: pin1=Ground, pin2= hot(s+), pin3=cold(s-)
Cinch
: tip= Signal (left or right), Ring= Ground
RJ45
(RS485) Wall panel:
Speakon (Left, Amplified Outputs Zone 1 and 2):
pin1+ = left out, pin1- = gnd, pin2+ = right out, pin2- = gnd
Speakon (Right, Amplified Outputs Zone 1 and 2):
pin1+ = right out, pin1- = gnd, pin2+ = /, pin2- = /
RS232 (serial connection interface)
The serial data protocol and wiring can be downloaded at
www.audac.be/download
or can be
asked at
.
ATTENTION
The Cat5 cabling must always be ‘straight’. In case of self made
cabling, it must be done as described above, to make the system
work properly.
Pin 1
White-Orange
/
Pin 2
Orange
/
Pin 3
White-Green
+12V DC
Pin 4
Blue
RS485 A
Pin 5
White-Blue
RS485 B
Pin 6
Green
GND
Pin 7
White-Brown
/
Pin 8
Brown
/
$
