AUDAC M1 User Manual & Installation Manual Download | Manualshive

Page: 27 / 28

background image

26

Additional Information M1

Technical specifications

Sensitivity Microphone input -60/-20 dB 600 Ohm balanced

Line input -20/+4 dB 10k Ohm

Frequency response                                                                  20 Hz – 20 kHz
T.H.D. by 1 kHz                                                                        less than 0.1%
Signal to Noise ratio                                                                               90 dB
Slew rate                                                                                  +/- 30V/µsec

Digital control                                                                                     RS-232
Remote zone control                                                                            RS-485
Web based control                                                                             Ethernet

Zone outputs 1-4                                                        +6dB 100 Ohm Balanced

Output power per channel                                                         100 Watt 8 Ohm
                                                                                             150 Watt 4 Ohm
Bridge mode                                                                            300 Watt 8 Ohm

Power Supply                                                                       240V AC, 50-60Hz
Max. power consumption                                                                         600W
Weight                                                                                                17.5 kg
Dimensions (B x H x D)                                          482 mm x 132mm x 350mm
Unit height                                                                                               3HE

«
...
25
26
27
28
»

Summary of Contents for M1





























Reviews:

No comments

Related manuals for M1

Brand: NAD Pages: 20

Brand: NAD Pages: 8

Brand: M2TECH Pages: 17

Brand: Bad Cat Pages: 9

PresentationPro PA300 Plus

Brand: Califone Pages: 11

Brand: Baldwin Boxall Pages: 4

Brand: T&M Performance Pages: 11

Brand: Unika Pages: 16

Brand: Harman Pages: 21

C1000P - SERVICE

Brand: McIntosh Pages: 42

1812R Blues King 12

Brand: SUPRO Pages: 8

Apocalypse AP600.2

Brand: Planet Audio Pages: 21

Brand: Sonosax Pages: 19

Brand: Harman Pages: 20

Brand: R.V.R. Electronica Pages: 32

Brand: Harman Kardon Pages: 11

Brand: JL Audio Pages: 2

Brand: Omnitronic Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands