13
The autoupdate function allows automatic updating of the database. When enabled,
the IMP40 automatically synchronizes with the database server whether a new update
becomes available, and if so, automatically start the database update process without
any noticeable consequences for the user / listener. Autoupdate is standard configured
as ON but can be disabled (switched to OFF).
Manual database updating can be started by selecting ‘Start Database Update’. When
selected, the currently stored database will be removed and the latest version is retrieved
from the server. The database update process can take few minutes before completed.
IP settings:
When highlighting the IP settings button is, an overview of the currently configured
network settings is given on the right screen side. When selected, a separate IP settings
menu will be loaded where all network settings can be customized.
DEFAULT NETWORK SETTINGS
DHCP:
ON
IP address:
Assigned by DHCP
Subnet mask:
Assigned by DHCP
Gateway:
Assigned by DHCP
DNS 1:
Assigned by DHCP
DNS 2:
Assigned by DHCP
IP Settings > DHCP:
In default configuration, the DHCP function for the IMP40 is enabled whereby the IP
address and other network settings are automatically assigned through the DHCP server
in your network.
Since the IMP40 doesn’t support any control commands from other devices over TCP/IP
in contrast to other TCP/IP control supporting devices, the IMP40 doesn’t need to have
a ‘fixed’ for being reachable through other devices.
IP settings > IP address:
The IP address for the system can be configured in this window. Each section of the IP
address can be individually adjusted by turning the rotary dial (clockwise for up, and
counter-clockwise for down). The currently adjusting section will be indicated in blue
colour. Once the correct number for the current section is selected, proceed to the next
section by pressing the rotary dial.
