AUDAC HS212MK2, User & Installation Manual

Page: 8 / 12

8
Connecting
Connection of low impedance version (HS212MK2):
The connection of the low impedance version (HS212MK2) is made using SpeakON
connectors. Two connectors are provided on the bottom side of the speakers’ enclosure.
The used models are 4-pin types, whereto the signal coming from the amplifier shall
be applied on the +1 and -1 terminals. The second connector can be used for linking
the signal coming from the amplifier to additional loudspeakers, resulting in a parallel
network.
Connection of 100V version (HS212TMK2):
The connection of the 100V (HS212TMK2) version is made in a waterproof connection
box fitted with a barrier terminal block. The speaker can be connected in low impedance
(8 Ohm) or high impedance (100V) systems with different power taps for 240W, 120W
and 60W. The suitable connection method can be chosen through connecting the
corresponding terminals.
The waterproof connection box shall be opened through releasing the four screws of the
cover. Inside this connection box, a 6-pin barrier terminal block connector is located.
The four terminals on the left side are used for connection of the 100V line transformer
power taps with power ratings of 240W, 120W and 60W. The wires coming from the
amplifier shall be connected between the ‘COM’ terminal and the desired power rating.
The two terminals on the right side are used for connecting the loudspeaker in low
impedance mode. The wires coming from the amplifier shall be connected between the
‘COM’ terminal and 8 Ohm terminal.
Above image indicates an example for both a 100V (left side) and low impedance (right
side) connection example.