AUDAC APC100 MK2, User Manual

Page: 18 / 24

18
When the APC100MK2 is connected to a LAN network without having access to internet,
the APC100MK2 time server can synchronize with a ‘Master’ time server in your LAN
network to avoid time expiring. In this case the IP address from the ‘Master’ time server
in your network should be entered in the ‘IP Address NTP server’ field. In all other cases
this field should be left blank.
When making changes to ‘Time server settings’ (timezone and/or IP address NTP server),
the function first need to be disabled before any changes are made to it, and need to
enable again to become effective.
RS232 settings
In this window the RS232 settings (baud rate) for the APC100MK2 can be configured.
RS232 settings screen for APC100MK2
Depending of the baud rate compatibility for the connected device to the RS232
connection of the APC100MK2, the baud rate can be configured in this screen. Selection
is done through a dropdown box and is possible between various baud rates for 1200
/ 2400 / 4800 / 9600 / 14400 / 19200 / 28800 / 38400 / 56000 / 57600 and 115200
baud. The default configured baud rate is 19200 baud, which is functional with all other
available AUDAC products. Press OK to confirm the baud rate and before the change
will become effective.