AUDAC APC100 MK2, User Manual

Page: 13 / 24

13
Chapter 3
Configuring the APC100MK2
The settings are configured in the web-based user interface of the APC100MK2. To get
access to these settings, it should get connected to a computer or LAN network through
an Ethernet connection. For more information about network connections and settings,
see IP basics in chapter 5.
The factory default IP address of the APC100MK2 is set to 192.168.0.194, make sure
this address is within the IP range of the network whereto its connected (sub net mask
255.255.255.0). If the default IP address is not within range of your LAN network, contact
your network specialist. The IP address can be changed in the configuration settings
menu but therefore a network connection must be established first!
Configuration interface
Start your default web browser and enter the IP address of the APC100MK2 in the ad-
dress bar on top. (The factory default IP address is http://192.168.0.194)
Login screen
First the login screen will be displayed.
A password should be entered to get access to the configuration interface. After the correct
password is entered, click the “OK” button, and you will be redirected to the configuration
screen of the APC100MK2. (The factory default password for the APC100MK2 is ‘APC’)
NOTE
The passwords can be changed in the ‘Password settings’ menu.