Auctus CONVERGENCE, User Manual

Page: 7 / 19

7
Installation Preparation

Voltage Inspection
Check if voltage of DC power or external power supply is within the range of the Product’s
working voltage (13.5 V±10%).

Product Inspection
Power on and check if the Product is running normally by inspecting the status of all indicators on
front panel. Please refer to “Basic functional operation” for details.

Fittings Installation
Firstly install RF antenna, power adapter and LAN cable before the Product is powered on. Refer
to steps below for items installation.

Assemble /Disassemble of RF Antenna
Connect the threaded end of RF antenna to the RF antenna connector and fasten it. Rotate the
antenna anticlockwise to remove it.

Assemble/Disassemble of Power Adapter
Connect the 2 pins connector at power adapter to the power connector and then fasten it. Remove
the connector at cable end of power adapter to remove the power adapter.