19
Accessories, spare parts
Name label, red headband for work supervisor, harness (cap +
he napestrap), headband with adjustable napestrap,
headband lining,
IDRA 2
shield, chinstrap.
Helmet marking
Upon request, helmets can be marked with the company logo.
The method used is thermal transfer marking with one or more
colours
(gradient colour not supported)
.
Marking dimensions: L 60 x H 40 mm in the front.
Stickers
It is possible to add a sticker on the front, side or back of the
helmet with the exception of the upper part of the helmet.
IDRA 2
shield
EN 166
EN 170
Polycarbonate
face shield
Limit of use: 48 months
Dimensions: 330 X 200 mm
Thickness: 2.2 mm
Shield weight: 150 g
YOU MUST PROTECT YOUR VIEW.
EYE DAMAGE IS IRREVERSIBLE.
Designed to protect the user against electric arc
short
circuits
in low-voltage electricity in accordance with standard
EN 166
, the IDRA 2 shield was tested against high-speed parti-
cles, molten metal, hot solids and liquid splashes according to
standard EN 166. The shield has received an
anti-fogging
treat-
ment on the inside and an anti-scratch treatment on the outside.
The shield is optical class 1 hence permanent use is allowed.
IMPORTANT RECOMMENDATIONS
The shield must be exclusively mounted on IDRA 2 safety
helmets.
•
Shield care:
the shield must be cleaned daily with warm water
and soap using a non-abrasive cloth to maintain the integrity of
surface treatments (anti-fogging inside, anti-scratch outside).
•
Disinfection:
if necessary, use isopropyl alcohol.
•
The shield can be damaged by certain chemicals. Do
not use aggressive chemicals such as solvents or deter-
gents.
For more information on this matter, contact the helmet
EN
