(2) Output status indicator
- In normal mode, this LED indicates the heater status.
When it is on (lit), the heater is powered. When it is off, the heater power is off. When it is
flashing, it means the heater is on and off intermittently to reduce the power output. It
should be synchronized with the power light on the cooking device.
(3) SET Key
- for showing current temperature settings, getting into parameters setting
mode and confirming various actions taken.
(4) “+” Key
- To increment displayed value
.
(5) “-“ Key
- To decrement displayed value.
(6) Time Key
- Change the Parameter Window between current timer and temperature
values, when pressed.
(7) Alarm indicator
- Lit when the alarm is on.
(8) Timer status indicator
- In normal mode, When “(8)” is on and “(9)” is flashing, LED
shows the time passed at current program step.
(9) Mode indicator
- the small “dot” is used to indicate what mode the controller is in.
When it is flashing and “(8)” stays on, “(1)” is the time that has elapsed at the
current program step.
When it is flashing “(8)” is off, the controller is in the parameter setting mode.
“(1)” is the value to can be changed by using (4) and (5) key.
Figure 2. Back Panel
2) Connecting the controller
This set up is good for the “Original”, Stainless Steel, and Digital Bradley Smoker.
