AUBER INSTRUMENTS
WWW.AUBERINS.COM
2017.05
P4/4
Power (120 or 240 VAC) is sent to terminal 9 and 10. The external switches on
terminals 2, 3, 4 and 5 should be momentary type. They are needed only if you
want to control the timer remotely. Otherwise, you can use the front keys on
the timer. The buzzer used in this example is also optional. The buzzer is also
powered by 120 VAC.
Figure 3. Wiring example of JSL-73B.
9.2) Signal controlled by DC logic signal.
Figure 4. Rising-edge triggered signal.
Figure 5. Inverted logic signal.
(End)
Auber Instruments
5755 North Point Parkway, Suite 99
Alpharetta, GA 30022, USA
www.auberins.com
E-mail: [email protected] Tel: 770-569-8420
Copyright 2007-2016, Auber Instruments All Rights Reserved.
No part of this manual shall be copied, reproduced, or transmitted in any way without the
prior, written consent of Auber Instruments. Auber Instruments retains the exclusive
rights to all information included in this document.
