manualshive.com logo in svg

Aube Technologies TH115-AF-024T, Owner'S Manual

Share
Download
Aube Technologies TH115-AF-024T Owner'S Manual Download Page 13

Owner’s Guide

12

ENG

LISH

WARNING

: To avoid damaging your floor, follow your floor supplier’s recommendations regarding floor tempera-

ture limits.

The minimum and maximum floor temperature limits are 5.0°C (41°F) and 28.0°C (82°F) by default.
To modify these limits, proceed as follows:

n

Switch the thermostat to Off.

o

Press and hold the 

 button.

p

Switch the thermostat back to On.

q

Release the

 button when the minimum temperature limit (

FL:LO

) appears.

r

Set the minimum temperature limit using the 

 buttons.

s

Press the 

 button to display the maximum temperature limit (

FL:HI

).

t

Set the maximum temperature limit using the 

 buttons.

u

Press 

Mode/Ret

 to return the thermostat to normal display.

NOTE

: The thermostat will automatically return to normal display if no button is pressed for 60 seconds.

Floor temperature limits (AF mode only)

400-115-051-B (Honeywell TH115-AF-GA_GB) 5 x 3.125 EFS.book  Page 12  Monday, April 12, 2010  3:10 PM

Summary of Contents for TH115-AF-024T























Reviews:

No comments

Brands by name

Popular brands

Load more brands