manualshive.com logo in svg

Aube Technologies TH115-AF-024T, Owner'S Manual

Share
Download
Aube Technologies TH115-AF-024T Owner'S Manual Download Page 12

TH115-AF-GA / TH115-AF-GB

11

ENG

LISH

When the Daylight Saving Time function is enabled (On), the thermostat automatically switches to Daylight Saving
Time on the second Sunday of March and to normal time on the first Sunday of November.

NOTE

: The Daylight Saving Time function is disabled (default setting) when the clock loses its setting.

To set the Daylight Saving Time function and to set the date:

n

Press the 

Day

 button (3 seconds) until 

DLS

 appears on the screen.

o

Press either of the 

 buttons to toggle between 

On

 (enabled) and 

Off

 (disabled).

p

Press the 

Day

 button briefly. The year setting is displayed.

q

Press either of the 

 buttons to set the current year.

r

Press the 

Day

 button briefly. The month setting is displayed.

s

Press either of the 

 buttons to set the current month.

t

Press the 

Day

 button briefly. The date setting is displayed.

u

Press either of the 

 buttons to set the current date.

v

Press the 

Mode/Ret

 button to return the thermostat to normal display.

NOTE

: The thermostat will automatically return to normal display if no button is pressed for 60 seconds.

Daylight Saving Time

400-115-051-B (Honeywell TH115-AF-GA_GB) 5 x 3.125 EFS.book  Page 11  Monday, April 12, 2010  3:10 PM

Summary of Contents for TH115-AF-024T























Reviews:

No comments

Brands by name

Popular brands

Load more brands