WUHAN AU3TECH TRADING CO., LTD
M
CC37
2
1
H
U
se
r’s
Q
uick
S
et
up
V1
.0
2
14
3.5 Connecting the signal amplifier for controlling Z axis by capacitance.
Motion control card-MCC3721H has integrated with the function of Z axis’s focus tracking
controller. Please connect the motion control card and amplifier with the signal cable in
10m or 15m provided by Au3tech.(Interface type: M12-4 aerospace plug )
3.6 Connecting computer.
SC1000 CNC system software can directly connect with PC through any internet port, which
is much more convenient and efficient.
3.7 Installing power
When all the external wirings are finished, it needs to provide 24V power for CNC
board(suggest to use 24V/10A power). As for the wiring mode, you can take the diagram for
reference.
All the wiring connecting parts are finished, only these above nothing more.
4.Cutting machine parameters
4.1 Software setup
SC1000 software can be downloaded from the website
. Unzip it and run
“MainApp.exe” , the software can be opened.
4.2 Communication setting
SC1000 is designed with industry Ethernet infrastructure. FTC is connected to MCC3721H
with Ethernet cable, so do PC connecting to MCC3721H.
1
、
IP auto setting
IP configuration : click “ADVANCED”-“Set IP”.
Note: User can set the IP address manually
：
10.1.1.10; Subnet mask
：
255.255.255.0;
default gateway
：
10.1.1.1
