46
Saf
ety P
recautions
Waterproof property
Do not use the product in places where it may be sprayed with high-
pressure water (e.g. near a faucet or shower head) or submerge it in
water for extended periods of time, as the product is not designed
to withstand high water pressure. Also, do not expose the product
to a water flow stronger than the specified flow rate (i.e. 6 liters per
minute from a faucet or shower head, at which you might even feel
pain in the skin). Doing so might cause a fault, even though the
product has a waterproof property equivalent to IPX5. Do not wash
the product in a washing machine or ultrasound bath.
The product does not float on water.
Heat resistance
Do not use the product in places where boiling water may splash
on it, in saunas or near hot air (e.g. hairdryer). The product is not
resistant to hot temperatures.
■
Draining water after wetting the product
As some parts of the product are not watertight, if you use the
product after it gets wet, water remaining in those parts might wet
your clothes or bag, or the sound might become hard to hear.
Follow the steps below to drain water.
Wipe water thoroughly
on the surface of the
product with a clean
dry lint-free cloth
Shake the product
①
Hold the product firmly and shake it in the direction of
arrows until water does not come out.
* When shaking the product, stay alert to your
surroundings.
* Be careful not to have the product pop out, and hold
it firmly to drain water.
Earphone microphone
terminal side:
20 times or more for each
side
Speaker/Microphone side:
20 times or more for each
side
②
Wipe drained water.
* The microphone, speaker and earphone microphone
terminal are particularly hard to drain water. Face
those parts down and press against the cloth to wipe
off.
③
Place the product on a dry towel or cloth and leave it at
room temperature.
