Safety Precautions
How to Clean the Product
Wipe off stains on the product using a foam
type hand soap or alcohol, etc. following the
procedures below.
■
When Using a Foam Type Hand
Soap/Body Soap
1
Remove the cables from the
product completely and turn it off
For details on how to turn the power off, refer to
"Turning the Power Off" (▶P. 76).
2
Apply a form type hand soap/body
soap to a soft cloth and wipe the
product quickly with it
Be careful not to allow the form type hand soap,
etc. to come into the holes such as the
earpiece/receiver or mouthpiece (microphone),
etc.
3
Rinse the product until foams are
removed completely
Wash the holes such as the earpiece/receiver
or mouthpiece (microphone), etc. for
approximately 30 seconds with running water.
4
Drain the holes such as the
earpiece/receiver or mouthpiece
(microphone), etc. thoroughly
For details on draining, refer to "Draining the
Product" (▶P. 45).
5
Dry the product thoroughly and
make sure that no waterdrops
remain on it
For details on drying the product, refer to
"Draining the Product" (▶P. 45).
43
Summary of Contents for G'zOne TYPE-XX
Page 1: ...Basic Manual...
