AU Aquos Phone SL IS15SH, Basic Manual

Page: 27 / 83

25
is15sh_e_02.fm
[25/28]
Saf
e
ty
Pre
ca
u
ti
on
s
B
Hold the product securely and shake it approximately
20 times until there is no more water splashing.
•
Make sure of the safety around you and shake the product while
holding it securely not to let it drop.
C
Wipe off water remaining in the grooves of each
section by gently putting the product against a dry
and clean cloth etc.
•
Since water is sometimes left in the grooves of each section, clear
them of water by putting a cloth against their openings and gently
patting them. Make sure that there is no more water or foreign
objects remaining in them.
D
Lay out a dry cloth etc. beneath and leave the product
on the cloth at room temperature for approximately 2
to 3 hours to dry it.
•
Water, if any, remaining in the main body may ooze up after wiping
off.
•
Do not wipe off water remaining in the grooves directly by a cotton
swab etc.
■
Precautions to be taken after water draining
Do not use the product with water drops still left on it.
•
Doing so may cause call disruption or cause clothes or bags to get
wet.
•
Doing so may cause short circuit of a jack section.
•
Doing so may cause fault due to the water drops frozen in a cold
place.
Mouthpiece
(Microphone)
section
Earpiece
(Receiver)
section
Speaker section
Camera lens
fringe section
is15sh_e.book 25 ページ ２０１２年７月２０日 金曜日 午後４時１８分