42
Multime
d
ia
~
~
~
~<MFZ>
ue09_as50_9e.fm
[42/44]
IS12SH has a CMOS out camera with approximately 8.05 effective
megapixels and a CMOS in camera with approximately 0.31 effective
megapixels for shooting 2D/3D photos and movies.
When the battery level is
(approximately 20 %) or lower, camera
cannot be activated.
Insert a microSD memory card before using camera. All the photos
and movies taken are saved in a microSD memory card.
•
The mobile light flashes in red while each camera mode (excluding
“mosimo camera 3D”) is activated.
•
Do not position the mobile light close to your eyes. Do not look at the
mobile light directly while it is on. Do not point on the mobile light
toward the eyes of others. It may harm eyesight.
•
The IS12SH may be warm after displaying the photo monitor screen
or operating repeated movie recordings for a long time. Be careful
of touching for a long time which may result in a low temperature
burn.
•
If you use the IS12SH camera in a wrongful manner, you may be
subject to punishment according to laws of the national and local
governments.
A
From the Main Menu,
Camera
.
The photo monitor screen is displayed.
Alternatively, hold down
b
while the home screen is displayed to
activate Camera.
Tap
/
to switch 2D/3D shooting.
B
at the bottom of the screen
/
b
.
The shutter sounds and the shot image is automatically saved.
On the photo monitor screen, press
e
[
Save settings
[
Auto
Save
to set to
OFF
. After that, the photo preview screen is displayed
after shooting. You can save the shot data etc.
Using the Camera
Cautions for Using the Camera
Taking Photos
•
3D shooting supports only landscape display.
•
If you operate nothing in the photo monitor screen for approximately three
minutes, Camera is terminated.
•
If the mobile light is set to
ON
, the mobile light is turned on and it is
automatically turned off in approximately three minutes.
AF lock
•
By tapping the section on which you want to set the focus in the photo
monitor screen, you can hold it in the state that it focuses on the tapped
section. When the focusing is locked, the AF frame is displayed and focus
lock tone sounds. If the focusing is failed, the AF frame is displayed in red.
•
On the photo monitor screen, press
e
[
Focus settings
[
Chase Focus
to set to
ON
. After that, if you move the AF frame to detect the subject, the
AF frame chases the subject even if the subject is moving.
•
On the photo monitor screen, press
e
[
Focus settings
to set to
Macro
Fixed
or
Infinity Fixed
. After that, you cannot use the AF lock.
•
You can take a photo by tapping the AF frame.
as50_ue.book 42 ページ ２０１１年７月１５日 金曜日 午前９時３６分
