Model :
ATZ HDMI4K-EM120TR
Description :
4K HDMI+USB KVM Extender over IP / Fiber
pg. 11
Notes
:
- All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Operation:
Once the button event is triggered correctly at the client side, when
system is setup correctly for Multicast. The selected EDID will be
update to Host Side EEPROM (HU7).
The same operation applies for Loopback EDID.
In the system setup, the last EDID updated will stay in the EEPROM.
If customer setup this button even many times, the last one
triggered will be applied.
USB Link (ON/OFF)
This feature is used for USB with Multicast Mode setup.
The selected client can gain control by pressing USB Link, and
release control by pressing USB Link again.
Other clients can also gain control by pressing USB Link. The control
will be transfer to whichever client requests USB Link.
Engineering Mode
1. Static IP: 192.168.0.88
2. User can connect to http://192.168.0.88 webpage for firmware
update.
3. Firmware update file name will be:
Host : webfwh.bin
Client : webfwc.bin
Reset to Default
1. Reset Any changes in SPI flash setup flag.
2. Re-generate Random mac to avoid any possible MAC collision.
After Reset to Default and reboot cycle, a new random mac will be
generated.
Ethernet Jumbo Frame 1. This feature is only available on AST1510 and above. AST1500
will be by pass this event.
2. Enable/Disable Ethernet jumbo frame.
3. If link LED is solid then jumbo is enabled. If link LED is blinking
then jumbo is disabled.
