Model : ATZ HDMI-18E50
Description : 1x8 HDMI Splitter over Cat.6 Extender, w/8x receiver units
pg.
4
Notes
: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be
slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright
EDID Control
Under normal circumstances, a source device (digital and analog) will require information about a
connected device/display to assess what resolutions and features are available. The source can then
cater its output to send only resolutions and features that are compatible with the attached
device/display. This information is called EDID (Extended Display Information Data) and a source
device can only accept and read one EDID from a connected device/display. Likewise, the source
could only output one resolution to connect to device/display.
The EDID switch allows for EDID learning or to pre-set an EDID to encourage a “handshake”
between the display and source.
Manual EDID Learning Mode
When you switch to any number of “0-8”, the Transmitter will set a fixed
EDID to the source. The detail EDID description, please refer to the EDID
table.
Auto EDID Learning Mode
When you switch to “9”, the Transmitter will copy the HDMI LOOP OUT
port display EDID to source.
Attention: Please confirm the extender is work normally, when you want to modify the
new EDID to source, toggle the EDID switcher to the corresponding number first, then
plug the Transmitter power again. The extender will send the new EDID to source.
