Model : ATZ HDMI-18E50
Description : 1x8 HDMI Splitter over Cat.6 Extender, w/8x receiver units
pg.
7
Notes
: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be
slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright
Wideband IR(30KHz---60KHz) introduction
IR Cable Pin Assignment
Control local device (Blu-ray player or DVD player, etc) from remote: The IR Receiver is connected to
the receiver IR in port. The CAT output connector on the HDMI Splitter is connected via CAT6 cable
to an HDMI receiver. The IR Transmitter is connected to the HDMI Splitter IR OUT port.
IR remote can be used to control local source device from remote.
1.Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver,
etc. to the HDMI input on the Transmitting unit.
2. Connect a display such as an` HDTV or HD Projector to the HDMI output on the Receiving unit.
3. Connect a single Cat5e/6 up to 164ft/50m to the output of the Transmitting unit, and the other
end to the input of the Receiving unit.
4. Connect the DC 12V Locking power supply to the power receptacle on the splitter.
5. Connect the power supply to an available electrical outlet.
