pg. 5
Notes
:
- All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model :
ATZ HDBT-E150B-18
Description:
HDBaseT™ 1x8 Splitter HDMI 2.0b, HDR10+, 18G, support 4K@60hz
(150m) c/w 8x Receivers
HDBaseT Receiver
No.
Name
Function Description
1
Power
Indicator
When the receiver is powered on, the power indicator will be
on.
2
SERVICE port
Used for firmware update.
3
DC 24V
Plug DC 24V/1A power supply into the unit and connect
the adapter to an AC outlet.
(
Note:
The HDBaseT receiver also can be powered by the
transmitter via a CAT cable.)
4
HDBT IN
Connect to the HDBT OUTPUT port on the transmitter
with a CAT cable.
5
Connection
Signal
Indicator lamp
(Green)
▪
Illuminating: Transmitter and Receiver are in good
connection status.
▪
Flashing: Transmitter and Receiver are in poor
connection status.
▪
Dark: Transmitter and Receiver are not connected.
6
Data Signal
Indicator
lamp
(Orange)
▪
Illuminating: HDMI signal with HDCP.
▪
Flashing: HDMI signal without HDCP.
▪
Dark: No HDMI signal.
7
HDMI OUT
HDMI output port, connect to HDMI display device such as
TV or Projector with an HDMI cable.
8
AUDIO OUT
Audio output port, connect to amplifier or speaker.
9
IR IN
Connect to the IR Receiver cable. The IR signal will send to
the IR OUT port of the transmitter.
10 IR OUT
Connect to the IR blaster cable, the IR signal is from IR
IN port of the transmitter.
11
RS-232
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through from transmitter to
receiver or from receiver to transmitter.
