MDU Solutions
®
– DVIS Nano - Nano-sized Digital Video Insertion System RF Output – Installation & Operation Manual
1-1
CHAPTER 1: SAFETY
SAFETY
1. Safety
WARNING! FAILURE TO FOLLOW THE SAFETY PRECAUTIONS LISTED BELOW MAY RESULT IN PROPERTY DAMAGE
OR PERSONAL INJURY. PLEASE READ AND COMPLY WITH THE FOLLOWING:
WATER AND MOISTURE:
Care should be taken to prevent entry of splashed or dripping water, other liquids, and physical
objects through enclosure openings.
DAMAGE:
Do not operate the device if damage to any components is suspected.
POWER SOURCES:
Only connect the unit to a power supply of the type and capacity specified in the operating instructions
or as marked on the device.
GROUNDING OR POLARIZATION:
Electrical grounding and polarization means must not be defeated.
POWER CORD PROTECTION:
Route power supply cord to prevent damage by external objects. Pay particular attention to
the exit point from the device and plug.
FUSING:
If your device is equipped with a fused receptacle, replace only with the same type fuse. Refer to replacement text
on the unit for correct fuse type.
SERVICE:
Do not attempt to service the device beyond procedures provided the operating instructions. All other servicing
should be referred to qualified service personnel.
MODIFICATIONS:
Modifications should not be made to the device or any of its components for applications other than those
specified in the operating instructions.
SAFETY CODES AND REGULATIONS:
The device should be installed and operated in compliance with all applicable local
safety by-laws, codes and regulations.
