MODULE CONNECTIONS
ChromaFlex DMT24, DMT34 & DMT44 Multi-Wavelength DWDM Direct Modulated Transmitter Module – Hardware Interface Manual
8-3
Important Note:
Always clean and inspect optical connectors prior to making a connection to the
DMTx4 optical ports. Never look into an optical connector when a signal is present.
Figure 9: Optical Connections
Please take the following steps for fi rst time set up of the unit.
•
Identify the transmitter unit at the corresponding slot location.
•
Connect each output port (1 through 4) to a fi ber jumper utilizing a good quality clean LC/APC connector to the next
device or fi ber cable per your specifi c design schematic drawing.
CHAPTER 8:
