background image

21

21

4  Important Notices

4  Important Notices

Important Information about Use

Installation

• 

Do not use the instrument in the vicinity of a TV, radio, 

stereo equipment, mobile phone, or other electric devices. 

Otherwise, the instrument, TV or radio may generate noise.

• 

Do not expose the instrument to excessive dust or vibrations, 

or extreme cold or heat (such as in direct sunlight, near a 

heater, or in a car during the day) to prevent the possibility of 

panel dis-figuration, damage to the internal components or 

unstable operation .

• 

The sensor of the hi-hat is exposed to extremely strong light, 

it may cause error .

Power Supply

• 

Even when the power switch is turned off, electricity is still 

flowing to the product at the minimum level. When you are 

not using the product for a long time, make sure to unplug 

the power cord from the wall AC outlet .

Cleaning

• 

When cleaning the equipment, be sure to use a clean, dry 

cloth. Cleaning products that contain organic solvents, paint 

thinner, detergents, and chemicallytreated cleaning cloths can 

cause discoloration and/or warping and should not be used .

• 

Do not dirty the reflection plate of the hi-hat. Otherwise the 

response of the instrument may get worse. When getting 

dirty, clean the instrument by using a wet towel.

Data

•  The company can not be held responsible for damage 

caused by improper use or modifications to the instrument or 

data that is lost or destroyed .

•  The stored contents may be lost due to malfunction of 

equipment or incorrect operation . Please backup important 

data .

About copyrights

•  This product incorporates audio / sound data contents in 

which ATV and third parties own copyrights . Using and 

copying these materials without permission (except for 

personal and other uses permitted by the copyright law) is 

prohibited .

•  ATV owns copyrights of the contents embedded or attached 

to this product. Such copyrighted materials include, without 

limitation, all computer software, sound / audio files, style / 

image data files, etc. Any unauthorized use of such programs 

and contents outside of personal use is not permitted under 

relevant laws.

• 

Do not make, resell, redistribute, or republish the 

abovementioned contents attached or affiliated to the 

product .

About this manual

•  The illustrations as shown in this manual are for instructional 

purposes only, and may appear somewhat different from 

those on your instrument .

•  The company names and product names in this manual are 

the trademarks or registered trademarks of their respective 

companies .

Summary of Contents for aDrums EXS-3CY























Reviews: