8 |
P a g e
Select an Adapter
The following tabs display in the
Configuration Options
pane when you select a specific Adapter in the
Adapter
Listing
pane:
•
The
Basic Info
tab displays information about the
selected Adapter.
•
The
Flash
tab provides a tool to update the firmware
of the selected Adapter. The flash tool is only
available for Adapters that support flash update.
•
The
SES
tab displays SES (SCSI Enclosure Services)
status information, such as power supplies and fans,
for SES Adapters.
About window
The
About
window, selected from the
About
menu item in
the
Help
menu, is an informational page which displays a
list of components installed for the ATTO ConfigTool, the
tool's version number and ATTO Technology contact
information.
Driver update
An Adapter driver can be installed or upgraded on a host by
going to the
Basic Info
tab for that host, choosing a driver
package in the driver update section and clicking update.
The driver package is the .exe (Windows) or .dmg (macOS)
file available for download from the ATTO website. If a
reboot is required, the GUI will prompt once the install
completes. If a driver was installed that has no matching
Adapter, the GUI will prompt to shutdown and install the
Adapter.
It is important to keep firmware and drivers up-to-date
for optimal performance. Refer to the product release notes (PRNs)
on the ATTO web site download page for additional information.
System Reboot
A host can be rebooted using its
Basic info
tab. Select
“Restart” and optionally provide a message. The host will
reboot in one minute. The
Message
area will be updated to
reflect the fact that the host has a scheduled reboot and
display the time the reboot will occur.