Page 2
1315 Directors Row Suite 107 Fort Wayne, IN 46808
⁞
(260)496-9668
⁞
www.atterotech.com
3
– Device Installation
3.1 ML1 – Mounting
A typical installation will involve mounting the wall plate
into a pre mounted wall box or mounting bracket. Before
installation, make sure the wall box where the ML1 is to
be installed is pre-wired with a suitable cable back to an
Axiom-enabled expander/injector.
Prior to ML1 installation, ensure the power sourcing
device (Axiom expander/injector) is powered off.
Attach and unshielded CAT-5/6 cable from the Axiom-
enabled device to the Axiom port A of the ML1.
With the cable attached, carefully place the ML1 into the
wall box taking care to not trap the cabling. Once in
place, secure it with the screws provided. Once the unit
is secured in the wall box, fit the Decora plate and secure
it with the screws provided.
Now you may apply power to the Axiom-enabled
expander/injector, the unit will power up and the signal
presence LEDs should blink once quickly.
The ML1 comes in a single gang US Decora style form
factor and may be mounted in most US single old and
new work back boxes and mud-rings. Given the single
gang size, the ML1 may be mounted in larger gang
boxes with other single gang form factor products to
provide flexible AV system modularity where needed.
*Note:
CAD drawings can be downloaded from the
Attero Tech website. Please contact Attero Tech for any
further product related information that is not
accessible on the website.
Figure 4 - Dimensional Drawing
