i
1315 Directors Row Suite 107 Fort Wayne, IN 46808
⁞
(260)496-9668
⁞
www.atterotech.com
ARCHITECTS & ENGINEERS SPECIFICATION
ML1
The single gang mount interface unit shall have two potentiometers on the front panel for gain control of the 3.5mm input and the balanced
input independently.
The unit shall have a 3.5mm stereo consumer level input and a ¼”/XLR combo Mic/Line input. This input is amplified and sent to the Axiom
bus. The XLR input shall be dedicated for dynamic microphone signals, while the ¼” input may be used to interface balanced line level audio
sources to the Axiom bus.
The unit shall have selector switches for audio channel routing on the top of the unit.
There shall be two bi-color signal presence and level indicator LEDs on the front of the unit. One for the balanced input and one for the
3.5mm input.
The unit shall have two 8P8C RJ45 type connectors on the back side of the unit.
The unit shall support daisy chain of up to 1 other Axiom device, using 2 RJ45 (8P8C style connectors) for connectivity to CAT-X cabling.
The device shall support mounting the mounting of multiple units side by side in a multi-gang wall box or one unit in a single gang US wall
box.
The unit shall be the Attero Tech Axiom ML1 product.
AXP2O
The device shall have an 8P8C connector for connectivity to Axiom bus compatible products.
Two 3-position de-pluggable terminal blocks provide balanced analog audio breakout from the Axiom port for connectivity to the balanced
or unbalanced inputs of external audio equipment.
A single, 3-postion de-pluggable terminal block provides RS-232 pass through connectivity to the Axiom port
The 24VDC input provides power injection to the Axiom port/bus.
The interface shall be compliant with the RoHS directive.
The device shall be the Attero Tech Axiom AXP2O.
