manualshive.com logo in svg

ATT Holding Kade KZ-700-U/H, Installation Manual

Share
Download
ATT Holding Kade KZ-700-U/H Installation Manual Download Page 10

Integrated Access Controller  – Installation manual  

All rights reserved. © AAT HOLDING S.A.

 

 

10 

Relay Setting (Pulse mode, Toggle mode) 
Pulse mode (Factory default) 

 

Toggle mode 

 

 

Door Detecting, Alarm, Sound and Light Settings 

 

Pulse mode ( Door relay time setting )

 

4   1   1~99   #  Zone 1

 

4   2   1~99   #  Zone 2

 

The door relay time is between 1~99 seconds, the factory de-

Toggle mode

 

4   1   0   #  Zone 1

 

4   2   0   #  Zone 2

 

Door Open Detection

 

Door Open Too Long (DOTL) warning

. When used with an optional magnetic contact or built-in magnetic con-

tact of the lock, if the door is opened normally, but not closed after 1 minute, the inside buzzer will beep auto-
matically to remind people to close the door and continue for 1 minute before switching off automatically.

 

Door Forced Open warning. 

When used with an optional magnetic contact or built-in magnetic contact of the 

lock, if the door is opened by force, or if the door is opened after 20 seconds of the electro-mechanical lock 
not closed properly, the inside buzzer and alarm output will both operate. The Alarm Output time is adjustable 
between 0~3 minutes with the default being 1 minute.

 

Alarm output time

 

To set the alarm output time (0~3 minutes)

 

 5   0~3   #  Factory default is 1 minute

 

Door open detection setting

 

 

 

To disable door open detection

 

(Factory default)

 

 6   0   #

 

To enable door open detection

 

 6   1   #

 

Keypad Lockout & Alarm Output options

. 

If there are 10 invalid cards or 10 incorrect PIN numbers in a 10 

minute period either the keypad will lockout for 10 minutes or the alarm will operate for 0~3 minutes, depend-
ing on the option selected below.

 

Normal status: No keypad lockout or alarm 
(factory default)

 

 7   0   #  (Factory default)

 

Keypad Lockout

 

 7   1   #

 

Alarm Output

 

 7   2   #

 

Light and Sound Setting

 

To set keypad backlight

 

81   0   #  To disable keypad backlight

 

81   1   #   To enable keypad backlight (Factory default)

 

To set LED

 

82   0   #   To disable the RED Led

 

82   1   #   To enable the RED Led (Factory default)

 

To set 

Acoustic Signal

 

The acoustic signal can be set on or off. 
When on, the device will give the voice 
when press the keys; when off, the device 
will be in silent.

 

83   0   #   To disable the keypad tone

 

83   1   #   To enable the keypad tone (Factory default)

 

Summary of Contents for Kade KZ-700-U/H













Reviews:

No comments

Brands by name

Popular brands

Load more brands