MAN - RTFO Touch - REV: 01
| B. Safety
4
product SDS or contact the manufacterer.
WARNING:
Do not place objects that may obstruct the sample rack or blower.
WARNING:
Before removing the air coil assembly always make sure the unit is powered
off and unplugged.
WARNING:
Unit should always be operated in a well ventilated area. Refer to and
adhere to SDS sheets of product being tested.
WARNING:
Proper Personal Protective Equipment (PPE) required for removal of hot
glassware.
B.3 Cautions
The following statements are caution statements. These statements alert the operator to conditions that may
damage equipment. Operators must be aware of these conditions in order to ensure safe operation of the
equipment.
CAUTION:
Installation of electrical devices must be accomplished by competent
personnel and done in accordance with any current local and national codes.
CAUTION:
The RTFO Touch must be grounded and wired in accordance with national
and local electrical code requirements.
CAUTION:
Before energizing the electrical power to the RTFO Touch, place all controls
in an OFF position.
CAUTION:
Do not exceed the maximum operating temperature.
CAUTION:
All supporting and contacting surfaces must be non-flammable. Do not allow
flammable materials to contact the shell.
CAUTION:
If an emergency shutdown needs to be performed, place ON/OFF switch in
an OFF position.
CAUTION:
Do not overflow RTFO Touch bottles. Refer to test specifications for proper
amount of material.
Summary of Contents for RTFO Touch
