ATS RTFO Touch, Instruction Manual, Page: 6 / 37

MAN - RTFO Touch - REV: 01 | B. Safety
2
B. Safety
B.1 For Owners, Operators, and Maintenance
Read and understand all instructions and safety precautions listed in this manual before installing or
operating the unit. If there are any questions regarding operation of the unit or the instructions in this
manual, contact the ATS service department at +1-724-283-1212.
In addition to the safety warnings listed on the equipment, warnings are posted throughout this manual.
Read and follow these important instructions. Failure to observe these instructions can result in permanent
damage to the unit, significant property damage, personal injury, or death.
All ATS equipment is designed to be operated with the highest level of safety. To maintain the safe operation
of this tester, ATS endeavors to educate the operator about safety issues surrounding certain parts of the
machinery. These safety issues are addressed through the use of labeling on the equipment. The following
labels may appear on your test unit:
Burn Hazard/Hot Surface
Electrical Shock/Electrocution
Protective Earth (Ground)
General Danger. When this symbol is displayed, user must always consult the manual to
determine the potential hazard(s) and any actions required to avoid them.
No Access for Unauthorized Persons
Read Operator’s Manual
Hand Entanglement
Ignition/Explosion
Additionally, the responsible body shall ensure that:
i. appropriate decontamination is carried out if hazardous material is spilled onto or into the
equipment