ATS MTL381, Manual, Page: 14 / 20

14
Chapter 4
Installation
4.4 Line Out Recorder i. V.
described in the following. The shorter the connection cable, the
lower the volume of the Line-Out outlet has to be adjusted.
Attention Auditory damage possible.
The maximum volume that can be adjusted for very
short connection cables is very loud. Set the volume of
the Line-Out Recorder at "low".
Attention
The MTL380-Head may only be opened by trained
specialists. Volume control may only be carried out by
trained specialists.
Fig. 4-5 Component layout MTL381-Head
1. Disconnect all the MTL381-Head connections.
2. Open the MTL381-Head casing.
3. Adjust the volume via control knob Line Out Recorder
volume. Turn the control knob clockwise to increase the
volume.
4. Close the casing.
5. Connect the MTL381-Head again.
6. Connect the Line Out Recorder using the 2 pin connector
at the front of the MTL381-Head.