ATS MTL381, Manual, Page: 13 / 20

Chapter 4
13
Installation
4.4 Line Out Recorder i. V.
Attention Auditory damage possible.
The maximum volume that can be adjusted for very
short connection cables is very loud. Set the volume of
the loudspeaker at "low" (turn the control knob com-
pletely to the left).
Fig. 4-4 Volume adjustment MTL381-Head
1. Adjust the volume via the control knob. Turn the control
knob clockwise to increase the volume.
Note Should loud interference noises be perceived, check
the cable contacts, the local distribution system.
4.4 Line Out Recorder i. V.
Using the optional adapter cable for the Line Out Recorder the
activities at the control head and the external communications
can be recorded, for instance via the sound card in a PC. For this
purpose a matching plug has to be fitted to the open ends of the
adapter cable.
The connections for the Line Out Recorder are located on the 8
pin connection on the extreme right of the MTL381 Head (comp.
labelling on casing). The functions Line Out, Hook and volume
control "Vol+/Vol-" are in preparation.
Fig. 3-5 Connection Line Out Recorder
Depending on the length of the CAT 7 S/FTP Ethernet extension
cable, the volume of the Line Out Recorder has to be adjusted as