manualshive.com logo in svg

ATS CyberChiller CCH-330-D-AR, Operation & Maintenance Manual

Share
Download
ATS CyberChiller CCH-330-D-AR Operation & Maintenance Manual Download Page 37

(©October, 2006)

CyberChiller Series Installation, Operation & Maintenance Manual

Frederick, Maryland USA 21704

CyberChiller Series

Telephone: (301) 620-2033

Facsimile: (301) 620-1396

Periodic General Maintenance Checks and Services Checklist

Date:

____________________________

Prepared By: ___________________________

Model Number: ____________________________

Serial Number: __________________________

Item Number:

____________________________

Monthly

Miscellaneous

❏

Check Glycol or Chilled Water for Air (bleed as required)

❏

Remote Condensing Unit Clean and Clear of Obstructions

Semi-Annually

❏

Check Refrigerant Charge (bubbles in sight-glass)

❏

Tighten Electrical Connections

❏

Check Suction & Discharge Pressure

❏

Check Contacts on Contactors

for Pitting

❏

Check Glycol Solution Concentration in System

❏

Clean Unit as Necessary

❏

Test the Glycol Solution 

Inhibitors (flush if necessary)

Annually

❏

Inspect Glycol System for Leaks and Corrosion

❏

Conduct a Complete Check of All Services Listed
Above and Clean Unit's Interior

Notes:

___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Signature:________________________________

*** If factory assistance is required for any reason, provide the model number, serial number, and SATS item

number found on the unit nameplate. This will speed the process and ensure accuracy of information. ***

A-2

Summary of Contents for CyberChiller CCH-330-D-AR









































Reviews:

No comments

Brands by name

Popular brands

Load more brands