MAN -
PLC
Lever Arm Tester - REV: 01 | B. Safety
3
B.2 Cautions
The following statements are caution statements. These statements alert the operator to conditions that may
damage equipment. Operators must be aware of these conditions in order to ensure safe operation of the
equipment.
CAUTION:
Read and follow all WARNING and CAUTION statements in all related
equipment manuals before attempting to operate this machine. If in any doubt about any
statement or sentence, contact the ATS Service Department or your ATS Sales Engineer.
CAUTION:
Installation of electrical devices must be accomplished by competent
personnel and done in accordance with any current local and national codes. Equipment
grounding is REQUIRED.
CAUTION:
Before energizing the electrical power to the lever arm tester, turn off all power
switches and place all controls in an OFF or neutral position.
CAUTION:
Match serial numbers on test frames, support blocks, and lever arms when
assembling multiple testers.
CAUTION:
When stacking weights on test frames, alternate slots at 180
°
to prevent tip-
over.
CAUTION:
Do not place anything under weight elevator that may prevent it from lowering.
