MAN -
PLC
Lever Arm Tester - REV: 01 | B. Safety
2
B. Safety
B.1 For Owners, Operators, and Maintenance
Read and understand all instructions and safety precautions listed in this manual before installing or operating
the unit. If there are any questions regarding operation of the unit or the instructions in this manual, contact
the ATS service department at +1-724-283-1212.
In addition to the safety warnings listed on the equipment, warnings are posted throughout this manual. Read
and follow these important instructions. Failure to observe these instructions can result in permanent damage
to the unit, significant property damage, personal injury, or death.
All ATS equipment is designed to be operated with the highest level of safety. To maintain the safe operation
of this tester, ATS endeavors to educate the operator about safety issues surrounding certain parts of the
machinery. These safety issues are addressed through the use of labeling on the equipment. The following
labels may appear on your test unit:
Burn Hazard/Hot Surface
Electrical Shock/Electrocution
Protective Earth (Ground)
Hand Crush Force From Above
General Danger
No Access for Unauthorized Persons
Read Operator’s Manual
FIgures C.1 and C.2 show the general locations of these labels on the test equipment.
