Atronic Harmony Upright, Operating Manual

Page: 37 / 51

37
April 2007
Harmony™ Upright - Operating Manual - C-Level
T
ROUBLESHOOTING
Audit Key Switch
Power Switch
RESET STATUS- AND ERROR MESSAGES
Occasionally, machines encounter a problem that
forces the machine into a machine lock (tilt) that has
to be reset. Also some on-screen messages require
to be confirmed and reset by an attendant.
For example: If the logic box was opened, the message
LOGIC BOX OPEN must be reset manually, after the
logic box was closed.
Follow these steps to reset status messages.
Reset a Status Message using the Audit Key
1. Make a note of the on-screen information, type of
error, game state, credit meter, etc..
2. Activate the Audit Menu, by turning the audit key.
3. Release the audit key to exit the Audit Menu. The
status message expires.
4. Verify the information that was noted before acti-
vating the Audit Menu.
Restarting the machine
In case of a machine freeze initiated by an error at
the peripheral hardware (e.g. bill acceptor), it can be
necessary to restart the machine to reinitialize the
peripheral hardware.
1. Make a note of the on-screen information, type of
error, game state, credit meter, etc..
2. Open the maindoor and power down the machine.
3. Wait at least 10 seconds (until the machine is
free of any voltage).
4. Turn machine power on. Do not close the maindoor
to prevent the machine from entering game mode.
5. Enter "Service Menu / Diagnostics" to check for
defective machine components.
6. Close the maindoor to enter game mode.