20
June 2008
e²-motion™ Installation Manual
MACHINE INSTALLATION
Topper Mounting
(optional)
The optional machine toppers are delivered seperately.
They have to be mounted and connected.
Note
: Toppers with a progressive display use an addi-
tional power supply not described in this manual.
Please refer to the relevant mounting instructions.
1. Connect and mount the toplight to the topper as
illustrated.
To avoid damaging, hold the toplight at its lower
ring, when you screw it into the topper bayonet
catch.
2. Thread the connecting cables and the earthing ca-
ble into the cabinet and position the topper onto
the cabinet.
3. Fix the topper with 4 knurled nuts.
4. Connect the earthing cable to the earthing stud
on the upper right inside the cabinet. Make sure
that the earthing has good contact and fix it with
a nut with lockwasher.
5. Connect the topper cable labled 65049935 to the
filterboard signal, connector P14.
6. Connect the topper cable labled 65049939 to the
filterboard signal, connector P6.
M
ACHINE
I
NSTALLATION
Hold here
P14
P6
