12
English
Maintenance
Turn off the motor and pull the plug before all cleaning and
•
maintenance work.
Clean the device regularly and completely. Use a small brush for this
•
purpose
Regularly check all screws and nuts and re-tighten them as
•
necessary.
Regular cleaning is important for the power and durability of the device.
•
Attention! Certain cleaning agents or solutions can damage the plastic
•
parts on the device. These include petrol, and cleaners and household
cleaners with chlorine. Avoid using such cleaning agents.
Should the device have irregular motor operation or no longer start,
•
have the motor carbon brushes checked and replaced if necessary by a
skilled electrician.
Only use certified original replacement parts.
•
Technical Data
Model:
10.122.9
Power:
1200 Watt
Voltage:
230 Volt/50Hz
Motor rotation speed:
600-3000 rev/min
Maximum ginding and polishing plate diameter: 180 mm
Power cord length:
2 meters
Noise level (Lpa):
85 db (A)