11
English
Start Up
Set up:
Attention! Always pull the plug before set up work.
•
Attach the grip to the equipment and screw it on with the included
•
screws.
Then screw the polishing disc onto the driveshaft of the polishing
•
machine.
Hold down the adjustment button and firmly pull the polishing disc
•
tight.
Apply the respective polishing set to the polishing disc.
•
Operation:
Connect the power cord to a 230 volt shockproof socket.
•
Hold the device steady with both hands before turning it on.
•
Push the power switch and the device begins to work.
•
Set the desired rotational speed with the rotational speed regulator.
•
Always pay attention to your extension cord during operation. It can
•
easily be pulled into the polishing plate of the machine with improper
place. Danger of injury!
Always keep the extension cord behind you.
•
Before starting up the device, take care that the polishing attachment is
•
not soiled.
Apply the polishing agent evenly to the polishing plate.
•
First put the polishing disc on the surface to be processed, and then
•
turn the machine on.
Do not apply pressure to the machine during the polishing procedure.
•
Turn the machine off with the polishing plate still on the surface to be
•
processed.
Device Protection:
Do not use the device in the rain or in a moist environment.
•
In the case of damage to the extension cord, pull the plug immediately.
•
The defective cord may no longer be used.
Check the device for damage. You should check all protective
•
equipment and movable parts for correct, normal functioning.
In order to guarantee correct operation, all parts should be properly
•
attached. All defective parts and protective equipment must be
replaced.