- 15 -
Notice: Before first preheating, the furnace will smoke rise. This is because of
protective lipids on the grills and other parts are heated, it is normal, and it will be
eliminated after the power up to the maximum for burning an hour.
8.2
、
Lighting the pilot light and Igniting the main burner
1.
Align the OFF indicative line of thermostat valve knob to the arrow (Figure 2) to close the
valve.
2.
And then axial press the thermostat valve knob, left 45 degrees, to the pilot position.
(Figure 3)
3.
At the fire position, completely press the knob, meanwhile light the fire by pilot with
another hand. (Figure 4) Keep pressing the knob about 10-15 seconds, then loosen
the knob and observe stability of fire.
4.
If the pilot fire is not ignited, please repeat the procedure above until the pilot fire is
ignited.
5.
After successful ignition, the main fire valve was opened, turn left to the desired
temperature (figure 5) and the griddle starts warming. When reaching the set
temperature, the thermostat valve will automatically adjust the gas flow to keep the
temperature on the griddle constant.
Tips
：
The pilot light may not be lighted immediately, for existing gas in the pipe. Wait
a minute, the pilot light will be lighted after the gas extinguished.
